Filter
Top Products
Digital Dosing Units
15
• Enter the additive percentage by using the Arrow Keys . (The
range of values that can be entered is 0.01% to 50.00%. The arrow keys are used
to change all process variables. The double arrow key allows the user to ramp up
or down by larger increments.)
Step 2:
• Press Input again.
• The symbols “g,” or “lb”, “min” and the screw symbol flash.
• After the “2”quickly flashes on the display, a number in the format xx.xxx will
come up on the display.
• Enter the shot weight using the arrow keys. The range of values that can be
entered is 001.0 to 6500 grams (0.01 to 14.30 pounds).
Step 3:
• Press Input
a third time.
• The screw and “s” symbols flash.
• After “3” flashes quickly on the display, a number in the format xxx.xx will
come up on the display.
• Enter the screw recovery time in seconds. This time represents the amount of
time the molding machine screw is in recovery. This value is an estimate. The
Digital Dosing unit measures the actual recovery time and automatically updates