Filter
Top Products
Digital Dosing Units
10
6. Repeat step #19 four more times, each time entering the new weight from the scale into
the controller using the arrow keys. Sometimes the values won’t change, or sometimes
they may only change by a few tenths of a gram. The controller keeps a running average
of all calibration weights entered.
7. After all five samples have been completed; press “calibration” once more and this will
save the calibration weight of the material to the recipe. The calibration light will go out
and the screen will now show the total amount of additive dosed. The Digital Dosing
feeder is now ready to begin operation.
8. Please refer to “Operation Manual” for all supplementary information regarding general
operation, cleaning/maintenance, and troubleshooting.
9. Make sure that there is a virgin material supply setup to begin processing. If you do not
have a loader or hopper for the virgin material, or if any of the above procedures did not
work properly, please contact the manufacturer in Wood Dale, IL for sales and
technical support @ (800) 423-3183 (8am-5pm) CST.
Q
U
I
C
K
S
T
A
R
T
P
A
G
E
S
H
A
V
E
B
L
U
E
B
O
R
D
E
R