Filter
Top Products
En
7
Connections and part names
Mixer section
1 TRIM control
Adjusts the individual channel output gain.
2 EQ (HI, MID, LOW) controls
Boosts or cuts frequencies for the different channels.
3 FILTER control
Turns on the filter effect for each channel.
When the control is set to the middle position, the original sound outputs.
Trun right: A cut-off frequency for the low-pass filter decreases gradually.
Turn left: A cut-off frequency for the high-pass filter increases gradually.
4 MASTER LEVEL control
Adjusts the master sound level output.
5 HEADPHONES LEVEL control
Adjusts the output level from the [PHONES] output terminal.
6 HEADPHONES CUE MASTER select button
Turns on to output the master sound from the headphones.
! Press it again to turn off to output.
[SHIFT] + press:
Turns on or off to display each panel of rekodrdbox.
7 HEADPHONES CUE 1/2 select buttons
Turns on to output sound from the headphones when the button is pressed.
! Press it again to turn off to output.
[SHIFT] + press:
The track’s tempo can be set by tapping the button. (Tap function)
8 Channel Level indicator
Displays the sound level of the respective channels before passing through the
channel faders.
9 Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[SHIFT] + move:
Uses the channel fader start function.
= Using the channel fader start function (p. 15 )
a Crossfader
Outputs the sound assigned with the crossfader assign switch.
[SHIFT] + move:
Uses the crossfader start function.
= Using the crossfader start function (p. 15 )
Effect section
1 FX ON/OFF button
Turns the beat FX on and off.
[SHIFT] + press:
Switches the types of beat FX.
2 FX BEAT settingc button
Decreases the beat fraction for synchronizing the beat FX effect sound each time
the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM auto mode. The track’s BPM value is
used as the basis for the effect’s tempo.
3 FX BEAT settingd button
Increases the beat fraction for synchronizing the beat FX effect sound each time
the button is pressed.
[SHIFT] + press:
Sets the beat FX tempo mode to the BPM tap mode. The BPM value used as the
basis for beat FX is calculated by the interval at which the button is tapped.
4 FX LEVEL/DEPTH control
Adjusts the beat FX parameter.