Filter
Top Products
En
11
Basic Operation
Reporting your rekordbox usage statistics
If you agree to your rekordbox usage statistics being sent to the manufactures, to
improve rekordbox quality and specifications, click [Yes] on the following screen. If
you do not agree, click [No].
Audio setup
When starting rekordbox on your computer connected to the unit, [Select Speaker]
is displayed.
Select an item, and then click [OK].
Adding audio tracks into [Collection]
The [Collection] screen contains a list of audio track files managed by rekordbox.
Register audio tracks on your computer to rekordbox, and analyze them so they can
be used on rekordbox.
1 Click [Collection] on the tree view.
A audio track list registered on [Collection] is displayed.
2 Open Finder or Windows Explorer, and then drag & drop
audio track files or folders with audio track files into the audio
track list.
Audio track files are added into [Collection], and then analyzing of waveform
information for audio track files starts.
Wait until analyzing of all audio track files is completed.
Loading an audio track into a deck of the
unit
This section explains how to load an audio track into Deck 1 (left) as an example.
Turn the rotary selector to select an audio track from [Collection],
and then press the [LOAD] button on Deck 1 (left).
The selected track is loaded.
Playing a track
This section explains how to output sound from Deck 1 (left) as an example.
1 Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
1 TRIM control
Turned fully counterclockwise
2 EQ (HI/MID/LOW) controls
Center position
3 FILTER control
Center position
4 Channel fader
Bottom position
5 MASTER LEVEL control
Turned fully counterclockwise
6 Crossfader
Center position
2 Press the [PLAY/PAUSE f] button to play the track.