Mitsubishi Electronics AD75P1-S3/P2- S3/P3-S3 Model Vehicle User Manual


 
Appendix - 3 Appendix - 3
MELSOFT
A
PPENDICES
APPENDIX 2 COMPARISON OF THE AD75 VERSIONS
Appendix 2.1 Comparison between AD75P1/2/3 and AD75P1-S3/2-S3/3-S3
The following table compares the A1SD75P1/2/3 and AD75P1/2/3 with the
A1SD75P1-S3/2-S3/3-S3 and AD75P1-S3/2-S3/3-S3.
A1SD75P1/2/3, AD75P1/2/3
Item
A1SD75P1-S3/2-S3/3-S3
AD75P1-S3/2-S3/3-S3
Version R
or later
Version Q
or earlier
Pulse output logic selection
Possible (select positive or
negative logic)
Not possible (positive logic)
Block transfer of positioning data Possible Not possible
Accel/decel time setting
Selection between 1 to
65635ms and 1 to
8388608ms possible
1 to 65635ms
JUMP instruction Available Not available
Continuous operation suspension
function
Available Not available
Starting bias speed setting Possible Possible Not possible
Stepping motor mode selection Possible Possible Not possible
Selection of operating speed for
original point shift
Possible Possible Not possible
Dwell time setting for OPR retry
function
Possible Possible Not possible
Accel/decel time changing function
for speed change
Possible Possible Not possible
Current value clearing function for
speed/position switching control
Possible Possible Not possible