Filter
Top Products
ASSEMBLY
34
p/n GH 19502091
Foreword
This chapter describes the phases involved in assembling a crated mower. When handling and
assembling the unit, and subsequently during use and maintenance, always use suitable personal
protection devices (A): always wear suitable clothing and the indicated protections. See the operating
manual supplied with the unit for indication of the symbols used in this manual. When handling the unit, lift
it by hooking up the special attachments and using a suitable hoist or crane rated for the weight of the
unit. This operation is quite dangerous and must only be performed by prepared, responsible personnel.
The machine weight is indicated on the identification label. The hook-up points are identified by the
"hook" symbol (B). When moving the unit, make certain that all protections and safety devices are in
place.
Dimensions and weight
A
B
C
SB 1106 (X2) 2340 - 92 700 - 27.5 740 - 29 520 - 1144
SB 1107 (X2) 2340 - 92 700 - 27.5 740 - 29 560 - 1232
TYPE
TYPE
A B C
(mm - inch) (kg - lb)(mm - inch) (mm - inch)
A
B