Filter
Top Products
INSTALLING
14
p/n GH 19502091
Quick Coupler (optional)
1) Install hitch Quick Coupler (S, Fig. 15) on the tractor (see
tractor operator manual).
2) Parking the sickle bar on a flat and compact ground
supported by the relative supports. Then slowly move
the tractor back until the Quick Coupler (S) is in range
with the point hitches (T and U, Fig. 15).
CAUTION: Before you work around hitch:
• STOP engine.
• LOCK park brake.
• FIRMLY block mower on horizontal surface.
3) Raise the Quick Coupler (S, Fig. 15) and make sure
that sickle bar hitch is in the right position (Z, Fig. 16).
S
V
VT
U
U
Z
Park vehicle safely
• Stop vehicle on a level surface, not on a slope.
• Disengage PTO.
• Engage the park brake.
• STOP the engine.
• Remove the key.
• Before you leave the operator’s seat, wait for engine and all moving parts to STOP.
Stay clear of rotating drivelines
Entanglement in rotating driveline can cause serious injury or death:
• Wear close fitting clothing.
• STOP the engine and be sure PTO driveline is stopped before getting near it.
Fig. 15
Fig. 16