Filter
Top Products
9
4.4 Installing the handlebar
Cougar and Cheetah
Push the handlebar into the upper frame open tube ends.
Depress both spring buttons simultaneously and push both
ends of the handlebar at the same time into the tube ends until
the spring buttons engage.
The handlebar can be height adjusted for two different
positions: remove by depressing the spring buttons together,
pull out the handlebar, rotate it 180° and re-insert the handlebar
into the tube ends.
DANGER
Before each journey make sure that the spring buttons of the
handlebar are fully engaged. A handlebar that works loose
may have serious safety consequences, especially when the
carrier is used as a Jogging Stroller or Stroller.
CX
The handlebar of the CX is installed in the same manner as
described in the section above. Only one position is possible
however, as the ergonomic fi ve-position CX handlebar allows it to
be gripped in various height positions, depending on use.
DANGER
Always make sure that you do not bend the brake cable of the
CX. This might reduce the braking effect, or the brake may not
even continue to function.
DANGER
Before each journey make sure that the spring buttons of the
handlebar are fully engaged. A handlebar that works loose
may have serious safety consequences especially when the
carrier is used as a Jogging Stroller or Stroller.