Filter
Top Products
44
Assembly
Attaching the skis to the carrier
Cheetah und Cougar
Remove the wheels (for this, press the rubber cap in the centre
of the wheel).
To attach the skis, press the spring button in and insert the
attachment axle into the axle socket until it can go no further.
Release the spring button. By moving the skis from side to side,
check that they are locked in the axle socket and cannot be
pulled off.
DANGER
Always make sure that the ski tips point towards the front.
DANGER
Before each journey make sure that the skis are securely
locked in the axle socket.
CX
To attach the XC Skiing Kit to the carrier, fi rst remove the carrier
wheels.
Then attach the clear protective caps over the exposed drum
brake calipers.
Pressing down the axle’s locking button, pull the axle all the
way out of the wheel hub.
Pressing down the locking button, insert the axle through the
socket at the top end of the ski frame.
Make sure that you insert the axle from the outside inwards,
looking in the direction of the ski tip.