Filter
Top Products
30
Attaching the carrier
From the front, insert the elastomer ball, which is attached to
the hitcharm, into the Axle-Mount ezHitch.
Pull the hitch ball rearward to the end of the socket in the axle
mounted hitch cup.
Push the security pin from the top through both holes of the
Axle-Mount ezHitch.
Secure the pin by pulling the hole of the rubber tab over the
protruding end of the pin.
Finally, always attach the hitch’s back-up safety strap around the
bicycle frame. To do this, from above, put the hitch back-up safety
strap around the chain stay, and attach the hook of the hitch back-
up safety strap to the hitcharm D-ring located on the underside of
the hitcharm.
1
2
3
4
5
6