Filter
Top Products
27
Screw the red refl ectors into the rear grommets on the storage
bag.
Screw the white refl ectors into the front grommets on the
passenger compartment.
Push the two safety fl ag rods together and guide the bottom
end into the hole located in the plastic end cap in the upper left
rear frame tube. Push the rod in until it stops.
Attaching the hitcharm to the
CTS Ready Chassis
The hitcharm is attached to the CTS Ready Chassis into the left
“VersaWing 2.0” bracket.
The hitcharm must always be attached into the left-hand
side of the carrier (as seen in the direction of travel). The
hitcharm must always be attached with both spring buttons
pointing upwards.
Press down the small button and slide the hitcharm into the
VersaWing 2.0 until the large button engages in the VersaWing
2.0 (Figures 1 to 3).