Filter
Top Products
HV-G Instruction Manual Page 21
Counting Mode
8 Counting Mode
In counting mode the total weight of articles is converted to a count and assumes
all articles have the same mass value.
It is necessary to store a unit mass to count articles.
8.1 Storing a Unit Mass
Step 1 Press the MODE switch to display the unit
PCS
.
Step 2 Press the SET switch to enter the mode to store a
unit mass.
Step 3 Press the ^ switch to select the number of sam-
ples. The greater the quantity of samples, the
greater the accuracy of the count.
5 pieces, 10 pieces, 20 pieces, 50 pieces, 100
pieces
Step 4 Put the container onto the pan.
When the stability mark is displayed press the
TARE switch.
Step 5 Put in the number of samples selected at step 3.
Press the ENTER switch to store the weight after
the stability mark is displayed. The count is then
displayed.
Caution
When the sample is too light and it is not possible to
calculate a unit mass, the scale displays lo ut and
returns to step 3. It is necessary to increase the
number of samples.
Pressing the ENTER switch after the lo ut . is
displayed, the next weighing mode is displayed.
When the unit mass is too light to store, the scale
displays lo ut .
Step 6 Remove all items from the pan.