Filter
Top Products
HV-G Instruction Manual Page 9
5 Installing the Scale
This procedure includes all of the steps for installing the HV-G series scales
Step 1 Unpacking
Remove the base unit and column from the
carton, taking care not to pull on the loadcell
cable.
Step 2 Fit the pan to the base unit.
Step 3 Insert the excess loadcell cable
into the column. Attach the column to the
base unit so as not to damage the loadcell
cable. Affix the column to the bracket using
four 5mm Allen screws.
Step 4 Select the place for installing the
scale.
Consider “4. Caution” on page 8.
Step 5 Level the base unit by using the
“Bubble spirit level” and “Levelling feet”.
Step 6 Press the caps at the pole top
from both sides and adjust the angle of the
display unit.
Step 7 Check the weighing accuracy. If
the scale needs calibration, refer to
“14 Calibration”.