Filter
Top Products
HV-G Instruction Manual Page 16
7 Basic Operation
7.1 Turning the Scale On/Off & Basic Weighing
7.1.1 Type V or Type L with AC adaptor
Step 1 Connect the scale to a ground point.
Step 2 Ensure that the pan is empty.
Step 3 Confirm that local voltage and receptacle type fit your scale.
Step 4 The scale turns on/off using the ON/OFF switch alternately.
Step 5 Check the accuracy of weighing. If you calibrate the scale, perform it after
allowing the scale to warm up for 30 minutes.
Step 6 Press the ZERO switch to display zero. (With nothing on the pan.)
Step 7 Place something on the pan gently.
Step 8 You can read the weight after the stability mark is displayed.
Step 9 Remove the item from the pan.
Step 10 Turn the scale off using the ON/OFF switch.
Memo
With the power cord connected, type V consumes only sufficient power for standby
status after turning off the scale.
With the AC adaptor connected, type L consumes only the power of the AC adaptor
after turning off the scale.