Filter
Top Products
HV-G Instruction Manual Page 10
5.1 Installing the Batteries for Type L
Step 1 Turn off the display.
Remove the AC adaptor.
Step 2 Press and slide to open the external cover.
Press the hook of the internal cover to the
left side and lift the cover.
Step 3 Insert six new dry cells ensuring correct
polarity (+,-). Battery size is ‘D’.
Step 4 Close the covers opened in step 2.
Caution
Replace used dry cells with six new ones, when
BATT is displayed.
Do not mix used and new batteries. It may cause damage to the battery
or product.
Check the polarity when installing the batteries. If you do not observe
this it may cause battery leakage. Also if the polarity of a battery is
wrong the scale may only work temporarily.
The battery life is dependent upon the environmental temperature.
Remove batteries from the display unit when the scale is not to be used
for a long time. They may leak and cause damage.
Damage which is due to battery leakage is not covered under warranty.