A SERVICE OF

logo

Open as PDF
next previous
3. Slightly slide the assembly toward the left side of the product to release it from the hinge pins.
CAUTION: Do not damage the plastic link arm (callout 1).
Figure 2-38 Remove the cartridge-door assembly (2 of 3)
1
4. Rotate the assembly down, and then separate the plastic link arm (callout 1) from the assembly.
Remove the cartridge-door assembly.
Figure 2-39 Remove the cartridge-door assembly (3 of 3)
1
72 Chapter 2 Removal and replacement ENWW