Filter
Top Products
CONTROLS AND FEATURES
70
Ampli er Control
The Ampli er Control setting is used to on/o the
connected REGZA-LINK ampli er.
a
In the REGZA-LINK Setup menu, press
b
to
highlight Ampli er Control.
b
Press
C
or
c
to select On or O .
Initial Speaker Setting
The Initial Speaker Setting allows to select speaker
TV speakers or Ampli er speakers.
a
In the REGZA-LINK Setup menu, press
b
to
highlight Initial Speaker Setting.
b
Press
C
or
c
to select TV Speakers or
Ampli er.
REGZA-LINK input source selection
If a REGZA-LINK device with HDMI switching
capability (e.g. AV ampli er) is connected to the HDMI
input, you can select another REGZA-LINK device that
is connected to the master HDMI device on the input
source list.
a
Press
o
and a list will appear on screen
showing available input sources.
b
Press
b
to select the desired input source
with REGZA-LINK icon.
c
Press
c
and a second selection screen will
appear showing all connected REGZA-LINK
equipment.
Inputs
TV
1
2
HDMI 2
HDMI 1
HDMI 3
HDMI 4
PC
1 DVD
2 VCR/DVR
3 CBL/SAT
4 GAME/TV
5 AUX
d
Press
B
or
b
to select the desired input
source, and then press OK.
NOTE:
These functions depend on the device connected.•
If you select the REGZA-LINK input source from •
the popup window, some REGZA-LINK devices
may automatically turn on.
When the television is switched on it will take a •
few minutes for the REGZA-LINK icon to appear
in the list. When an HDMI cable is removed, it will
take a few minutes for the icon to disappear.
If the HDMI cable from connected equipment is •
changed, Enable REGZA-LINK in the REGZA-LINK
Setup menu may need to be reset to On.
If you change the HDMI lead to a connected •
device or change an HDMI device setting, reset
the Enable REGZA-LINK item on the REGZA-LINK
Setup menu from O to On.
REGZA-LINK one touch play
When connected equipment is switched on, REGZA-
LINK will automatically detect the television through
the input selection. If the television is in standby, it will
be switched on automatically.
These functions can be enabled or disabled from
the REGZA-LINK Setup (see page 69).
NOTE:
Even if the equipment is showing a menu, the •
television may automatically show the input
source.
This feature depends on the connected •
equipment and television state.
REGZA-LINK system standby
If the television is turned o (standby mode), the
television will send a message to turn o (standby
mode) all of the REGZA-LINK devices connected to the
television.
These functions can be enabled or disabled from
the REGZA-LINK Setup (see page 69).
NOTE: This feature depends on the connected
equipment and television state.