Toshiba 46TL900A Model Vehicle User Manual


 
CONTROLS AND FEATURES
35
Picture controls
Most of the picture controls and functions are
available in both digital and analogue modes.
PLEASE NOTE: Features not available will be
grayed out.
Picture Mode
This television o ers the choice of personalising the
picture style.
AutoView, Dynamic, Standard, Movie 1, Movie
2, Store, Game and PC are preset options and a ect
many features/settings within the television.
NOTE:
Because the AutoView mode automatically
adjusts picture settings based on ambient light
conditions and input signal content, the Auto
Brightness Sensor menu is grayed out when it is
selected.
Store mode is only available when Location is set
to Store.
Game mode is available in external input mode
(other than aerial input). When you select Game
mode, suitable widescreen formats will be
selected.
PC mode is available in RGB/PC input mode or
HDMI input mode.
a
Press MENU /
C
c
to highlight Setup icon.
b
Press
B
/
C
c
to highlight Picture icon and
press OK.
c
Press
B
or
b
to select Picture Mode.
Picture
Picture Mode
Reset
Backlight
Colour
Tint
Sharpness
100
100
0
0
0
0
Standard
Contrast
Brightness
d
Press
C
or
c
to select the picture mode you
prefer and press OK.
NOTE: The picture mode you select a ects the
current input only. You can select a di erent picture
mode for each input.
Picture preferences
You can customize current picture mode settings as
desired. For example, while selecting “Dynamic”, if
you change the following items, such as Backlight,
Contrast, Brightness, Colour, Tint, Sharpness
and the Advanced Picture Settings items, your
new settings are saved for “Dynamic” picture mode.
a
In the Picture menu, press
B
or
b
to select
either Backlight, Contrast, Brightness,
Colour, Tint or Sharpness and press OK.
b
Press
C
or
c
to adjust the settings.
Reset
This feature resets all picture settings to the factory
settings except Picture Mode.
a
In the Picture menu, press
B
or
b
to select
Reset and press OK.
b
A con rmation message will appear. Press
C
or
c
to select Ye s and press OK.
ColourMaster
When ColourMaster is set to On, it allows the ‘Base
Colour Adjustment’ feature to become available.
a
In the Picture menu, press
B
or
b
to select
Advanced Picture Settings and press OK.
b
Press
b
to select ColourMaster.
Advanced Picture Settings
ColourMaster
Base Colour Adjustment
Colour Temperature
Noise Reduction
Active Vision
Off
Off
Low
Auto Brightness Sensor
Active Backlight Control
Middle
High
Black/White Level
c
Press
C
or
c
to select On or O and press
OK.