Filter
Top Products
CONTROLS AND FEATURES
69
c
Press OK to display Digital Audio Output
menu and press
B
or
b
to select an option.
Audio Format:
Press
C
or
c
to select PCM or Auto.
PCM: This mode outputs PCM format
to the digital audio output
socket.
Auto: This mode outputs Dolby Digital
(if available) or PCM to the digital
audio output socket.
Dolby Digital
S
Dolby Digital
Dolby Digital Plus
S
Dolby Digital
MPEG
S
PCM
HE-AAC
S
Dolby Digital
Audio Delay:
Press
C
or
c
to select Auto or Manual.
Auto: This mode automatically adjusts
the audio timing to meet the
video timing.
NOTE: The time lag might
be large between the image
and sound depending on the
connected equipment (ampli er
etc.). In that case, select Manual.
Manual: You can manually adjust the
audio signal timing to meet the
video signal timing.
Delay Adjustment:
Press
C
or
c
to adjust the audio signal
timing (0 – 250ms) to meet the video signal
timing.
NOTE:
This feature is grayed out when • Audio
Delay is in Auto.
A time lag will occur when the video signal •
or audio signal is changed. Adjust the
timing accordingly.
When adjusting the timing, turn down the •
volume of the AV equipment used as far
as possible. Depending on the equipment,
noise etc. may occur when the signal is
changed.
Depending on the connected equipment •
(ampli er, etc.), adjustment may not be
possible.
When the optical digital output setting •
(Auto
t
PCM) is changed, it may be
necessary to adjust the timing again.
Do not use other than for audio output •
from the AV ampli er, etc. (Malfunction
may occur)
Using REGZA-LINK
This is a new feature that uses CEC technology
and allows you to control Toshiba REGZA-LINK
compatible devices from the television remote
control via HDMI connection (page 13).
When the Enable REGZA-LINK item in the REGZA-
LINK Setup menu is set to On, individual functions
also set to On will be activated.
Enable REGZA-LINK
a
Press MENU /
C c
to highlight Setup icon.
b
Press
B
/
C c
to highlight Preferences icon
and press OK.
c
Press
B
or
b
to select REGZA-LINK Setup
and press OK.
d
Press
b
to select Enable REGZA-LINK and
press
C
or
c
to select On.
REGZA-LINK Setup
Enable REGZA-LINK
On
TV Auto Power On
Auto Standby On
Amplifier Control On
Initial Speaker Setting TV Speakers
NOTE: If you set Enable REGZA-LINK to O ,
all other items will be grayed out.
TV Auto Power
The TV Auto Power setting allows the television to
be automatically switched on if a REGZA-LINK device
is turned on.
a
In the REGZA-LINK Setup menu, press
b
to
highlight TV Auto Power.
b
Press
C
or
c
to select On or O .
Auto Standby
When Auto Standby is enabled, the television, when
switched o , will automatically switch o (standby
mode) all connected REGZA-LINK equipment.
a
In the REGZA-LINK Setup menu, press
b
to
highlight Auto Standby.
b
Press
C
or
c
to select On or O .