Toshiba 46TL900A Model Vehicle User Manual


 
CONNECTING YOUR TV
11
Connecting external equipment
Before connecting any external equipment, turn o all main power switches. If there is no
switch, remove the mains plug from the wall socket.
Media Recorder
or
Scart/RCA adaptor
(supplied)
Aerial Cable
LAN port
SCART (EXT 1)
DIGITAL AUDIO OUTPUT
(OPTICAL)
HDMI 4 INPUT
HEADPHONE jack
HDMI 1/2/3 INPUTS
COMPONENT VIDEO/AUDIO
INPUT, VIDEO/AUDIO INPUT
(Y/L/R) (EXT 2)
RGB/PC INPUT
Power cord
ILLUSTRATION SHOWS 40TL900A.
Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the
television. If you use a decoder and/or a media
recorder, it is essential that the aerial cable is
connected through the decoder and/or through the
media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the
television.
Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and
media recorder to Standby.
The RCA sockets alongside the COMPONENT
VIDEO INPUT sockets will accept L and R audio
signals.
When connecting the VIDEO/AUDIO devices,
connect those cables to Y/L/R sockets.
The Digital Audio Output socket enables the
connection of a suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-De nition Multimedia Interface) is for
use with a DVD decoder or electrical equipment
with digital audio and video output. For acceptable
video or PC signal formats through the HDMI
terminals, see page 78.
NOTE: Although this television is able to connect
to HDMI equipment, it is possible that some
equipment may not operate correctly.
LAN port is used to connect the TV to your home
network. This TV can play digital content stored on a
DLNA CERTIFIED™ product with server function.
A wide variety of external equipment can
be connected to the back of the television;
therefore, the relevant owner’s manuals for all
additional equipment must be referred to for
exact instructions.
If the television automatically switches over to
monitor external equipment, return to normal
television by pressing the desired programme
position button. To recall external equipment, press
o
to select between TV, EXT1, EXT2, HDMI1,
HDMI2, HDMI3, HDMI4 or PC.
When the external input mode is selected while
viewing DTV mode, the SCART socket does not
output video/audio signals.