Toshiba 46TL900A Model Vehicle User Manual


 
CONNECTING YOUR TV
16
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used for some functions.
40TL900A.ILLUSTRATION SHOWS
Ambient
Light Sensor
USB 1 port
USB 2 port
Control panel
3D IR
Media Player/Wireless LAN adaptor ready for a home
network
USB HDD connection ready
Media Player/Wireless LAN adaptor ready for a home
network
USB HDD connection ready
RED LED – Standby
GREEN LEDPower on
ORANGE LEDProgramme
timer set (digital only)
RED LEDRecording
Switching on
If the RED LED is not lit, check that the mains plug
is connected to the power supply and press
1
on
the remote control; it may take a few moments. The
GREEN LED will be lit.
To put the television into Standby, press
1
on the
remote control. To view the television, press
1
again.
The picture may take a few seconds to appear.
For energy saving:
We recommend that you use the television with
the factory settings. The factory settings are for
energy saving.
Unplugging the mains plug will cut energy use to
zero for all televisions. This is recommended when
the television is not being used for a long time,
e.g. when on holiday. Reducing the brightness of
the screen will reduce energy use.
Energy e ciency cuts energy consumption and
thus saves money by reducing electricity bills.
NOTE: Putting the television into standby mode
will reduce energy consumption, but will still
draw some power.
Using the menu system
Press MENU on the remote control to display the menu.
The menu appears as a list of  ve topics. As each
symbol is selected by pressing
C
or
c
on the remote
control, its respective options will appear above.
NOTE: The same menu is displayed in DTV (Digital
TV) and ATV (Analogue TV) modes; however, where
some items are not available in a mode, they will
appear grayed out.
To use the option, press
B
and
b
on the remote
control to move up and down and press
C
or
c
to
select your desired setting.
Using the TV controls and connections
To turn on or o the TV, press
!
.
To alter the volume, press + or – .
+ and – buttons operate as volume up/down as
default.
To alter the programme position, press
p
/
o
once
and press
u
or
U
.
To select an external input, press and hold
p
/
o
until the Inputs window appears, and then press
u
or
U
to select the appropriate input source.
The Media Player feature provides access to photo,
movie and music  les stored on a USB storage
device that is connected via the USB1 or USB2 port
or on a network device.
The USB port also has to be used with the “TOSHIBA
Dual Band WLAN Adaptor WLM-20U2” in order to
access a wireless network.
You must use the TOSHIBA Wireless LAN device to
ensure correct operation of this feature. This feature
is available only when the “TOSHIBA Dual Band
WLAN Adaptor“ is used.
Please always refer to the owner’s manual of the
equipment to be connected for full details.
NOTE:
The USB socket has limited functionality and
Toshiba can take no responsibility for damage to
other connected equipment.
Interactive video games that involve shooting a “gun”
at an on-screen target may not work with this TV.