Filter
Top Products
INSTALLING YOUR TV
6
Installation and important information
Where to install
Locate the television away from direct sunlight and
strong lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can support
the weight of the TV. In order to prevent injury and
maintain stability of this apparatus, secure the TV to
the level surface using the strap if tted, or to a wall
using a sturdy tie to the P clips provided. Otherwise
secure the TV on the level surface using the supplied
mounting screw.
The LCD display panels are manufactured using an
extremely high level of precision technology; however,
sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a sign
of a malfunction.
Make sure the television is located in a position where it
cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please be certain that small
items cannot be inserted into slots or openings in the case.
Sturdy tie (as short as possible)
Stand clip
Fixing strap
Screw
(supplied)
Fixing strap
‘P’ Clip
Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.
Studies indicate that plastics may weaken and crack over time from the combination e ects of
chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could
result in serious injury and/or permanent damage to TV and TV pedestal.
When using a Wall Bracket
Please use a wall bracket appropriate for the size
and weight of the LCD TV.
Two people are required for installation.•
To install a wall-mount from another manufacturer, •
use the SPACERS (supplied).
1 Unplug and remove any cables and/or other
component connectors from the rear of the TV.
2 Carefully lay the front of the unit face down on a
at, cushioned surface such as a quilt or blanket.
3 Follow the instructions provided with your
wall bracket. Before proceeding, make sure
the appropriate bracket(s) are attached to the
wall and the back of the TV as described in the
instructions provided with the wall bracket.
4 Make sure to place the spacers supplied between
the bracket and the back of the TV.
5 Always use the screws supplied or recommended
by the wall mount manufacturer.
Removing the Pedestal Stand:
1 Carefully lay the front of the unit face down on a
at, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
NOTE: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2 Remove the four screws.
Four screws
3 Once you have removed all four screws holding
the pedestal stand in place, remove the pedestal
stand from the TV by sliding the pedestal stand
away from the TV.
Place four spacers (supplied).
CAUTION: The diameter and length of the screws di er
depending on wall bracket model. Use of screws other
than the screws speci ed may result in internal damage
to the TV set or cause it to fall, etc.
Screw
Wall bracket
Spacer (supplied)
TV back panel
28–32mm
M8
Stand style is dependent on model