Filter
Top Products
6 - 2 6 - 2
MELSOFT
6. PROJECT CREATION
6.1 Creating a New Project
Set the AD75 model used to create a new project and the project items.
↓
1) Click the [Project] → [New Project] menu (
).
↓
2) Click the AD75 connected module "Reference"
button in the New project file dialog box.
↓
3) Choose the AD75 model name in the list box.
The AD75 Model and AD75 Axis select radio
buttons may also be used to make that selection.
4) Click the "OK" button.
5) Set the project save path.
The project save path defaults to
C:\MELSEC\AD75WINE\USR.
When changing it, refer to "HELPFUL
OPERATION" on the next page.
6) Set the project name.
When specifying the project file name, you can
use a total of up to 150 characters to set the
project path and project name.
When setting the project path and project name,
the total number of characters should be within
150.
This screen assumes that the project name is
"SAMPLE".
7) Set the project title as required.
8) Click the "Create" button.
This creates a new project.
6