Filter
Top Products
12 - 3 12 - 3
MELSOFT
12. USEFUL FUNCTIONS
12.1.2 Changing the AD75 model after data setting
PURPOS
E
Change the AD75 model after setting the parameters, positioning data or other
data.
When you want to utilize the project data which is different in AD75 model, change
the AD75 model after reading the saved project.
BASIC OPERATIO
N
1. Place the main screen in the icon display status.
2. Click the [Project] → [Change AD75 model] menu.
3. Choose the model and the number of axes in the AD75 model dialog box.
4. Click the "OK" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
AD75 model Choose the model series (type with the exception of the axis number) of the AD75.
AD75 Axis select Choose the number of axes of the AD75.
List box You can select the model series and number of axes of the AD75 at the same time.
"OK" button
Click this button to change the model of the project.
Independently of the AD75 model selected for the project, all data that can be set in
the edit mode are saved in the project.
In a new project whose number of axes is 1, the parameters, positioning data, start
block data, etc. of undisplayed Axis 2/Axis 3 are saved. (However, the data of Axis
2/Axis 3 are initial values.)
When the project whose number of axes is 3 is saved after changing to a model for
1/2 axes, the data of Axis 3 is saved unchanged.
Therefore, the model can be changed without restriction on the model selected
when a new project is created.