Mitsubishi Electronics AD75P1/P2/P3 Model Vehicle User Manual


 
12 - 13 12 - 13
MELSOFT
12. USEFUL FUNCTIONS
12.3.2 Copying the data on a start block basis (Start block copy)
PURPOS
E
Using the start block copy function, copy the start block to the other blocks.
The start block copy function is performed to copy data between blocks in the
same axis.
Note that if AD75P# is selected in Change AD75 model, the start block copy
function cannot be performed.
BASIC OPERATIO
N
1. Display the start block data edit main screen (refer to Section 9.3) of the axis
whose data will be copied.
2. Click the [Edit] [Start block copy] menu.
3. Set the block No. of the copy source and the block No. of the copy destination.
4. Click the "OK" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Copy source block No. Choose the block No. of the copy source.
Copy destination
Set the block No. of the copy destination.
Two or more blocks can be set at the same time.
"OK" button Click this button to copy the data.