Filter
Top Products
9
206-4245
Pro:Centric Operation (Cont.)
Pro:Centric Setup
Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric
Server Admin Client User Guide. This document describes only those settings that must be specied on
the TVs.
On the TVs, the Data Channel must be set appropriately to enable Pro:Centric remote management/
administration facilities, while the Pro:Centric Application Mode must be set appropriately to enable the
Pro:Centric application.
• Remote management/administration (TV E-Z Installation): The Pro:Centric server Admin Client provides
remote management/administration facilities for downloading splash screens and software/firmware
updates as well as facilities for downloading the FTG Channel Map and FTG Installer Menu settings for
TVs that are in FTG Mode via CPU.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric server Admin Client.
The Data Channel and Pro:Centric Application Mode can be set using one of the following methods:
• If the TV is in Pass-through Mode, set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL
to the appropriate values. Refer to “Installer Menu” information on pages 15 to 24 for further details. Also,
as necessary, refer to “Custom Master TV Setup” information on pages 25 to 28 and/or cloning information
on pages 34 to 42.
Note: When the TV is in either Pass-through or FTG Mode, you can also leave Installer Menu item 119
DATA CHANNEL set to its default value (255) to enable the TV’s Data Channel Auto Search feature to set
the DATA CHANNEL value. See item 119 description on page 24 for additional information.
• If the TV is in FTG Mode, use the FTG File Manager to update the Pro:Centric and Data Channel Installer
Menu items. Then, transfer the FTG Installer Menu settings to the TV. Refer to FTG Mode information on
pages 43 to 49 for further details. Also, see note above regarding the option to use the TV’s Data Channel
Auto Search feature to set the DATA CHANNEL value.
Note: If using a Pro:Centric pillow speaker, also set Installer Menu item 027 HOSPITAL MODE to the
required value.