Filter
Top Products
64
206-4245
OPTION
OK
Move
• Language
• Caption : Off
• Standby Light : Off
• My Media Setting
• Set ID : 1
• Demo Mode : Off
• Zone : 1
• Eject
Reference: Using the TV Zoning Feature (Cont.)
At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may
opt to congure Zone restrictions for selected channels in the FTG Channel Map, but at the same time, you
can choose to congure all TVs at the site with the same Installer Menu and/or TV Setup Menu settings. For
example, an FTG Conguration (.tlx) le being used to congure the TVs at a site may contain multiple
Installer Menu and TV Setup Menu proles with different Zone designations, as well as several channels
with Zone restrictions. Each TV congured with the default TV Zone 0 will download only the Installer Menu
and/or TV Setup Menu prole(s) with a Zone 0 designation. If, on the other hand, the TV Zone # is set to 1,
during conguration the TV will rst attempt to retrieve Installer Menu and/or TV Setup Menu proles with a
Zone 1 designation. If none of the Installer Menu and/or TV Setup Menu proles has a Zone 1 designation,
the TV will download the prole(s) with a Zone 0 designation. For the FTG Channel Map conguration, when
the TV Zone # is set to 0, the TV will ignore any Zone restrictions (1–8) that may be placed on channels in
the FTG Channel Map. However, when the TV Zone # is set to 1, during conguration, the TV will omit any
channels that have been restricted from Zone 1 in the FTG Channel Map.
Using the TV Zoning Feature with Cloning Conguration
A location-specic conguration / .tlx le may be saved (Learned) from an individual TV as part of a Master
TV Setup and then be used during Teaching. For example, if the TV Zone # in the Master TV is set to 3
before Learning is initiated, the Master TV’s Installer Menu and TV Setup Menu proles will be saved with
the TV Zone 3 assignment when Learning is completed. In order to congure the Target TVs with the Zone 3
Installer Menu and TV Setup Menu proles Learned from the Master TV, you must set the TV Zone #
accordingly in the Target TVs before transferring (Teaching) the Master TV Setup. See “Set the TV Zone # in
the TV” below. Also, see “Learning / Teaching a Master TV Setup using a USB Memory Device / .tlx File”
on pages 35 to 36 for additional information on the cloning processes. TV Zone 0 is the default TV Zone #.
Close
1
►
►
Set the TV Zone # in the TV
Use the following procedure to set a TV Zone # in the TV. Note that
this procedure can only be performed while the TV is in Pass-through
Mode.
1. Turn ON the TV.
2. Press MENU on the Installer Remote, and use the arrow navigation
keys to select/highlight the OPTION menu option. Then, press OK.
3. Use the Up/Down arrows to select Zone, and then press OK.
4. In the Zone pop-up window, you can set the TV Zone # so that the TV
can be congured with Installer Menu and/or TV Setup Menu settings
intended only for the assigned Zone. The Installer Menu and/or TV
Setup Menu settings may be provided in a .tlx le to be used either
for Teaching (cloning) or FTG Mode via CPU conguration. If the TV
is being congured for FTG Mode via CPU, the TV Zone # setting
also allows the TV to omit channels that have been restricted in the
FTG Channel Map. Use the Left/Right arrow keys to select the TV
Zone # (1–8) for this TV. Then, press OK.
5. Press MENU to return to TV viewing.