Filter
Top Products
36
206-4245
USB Cloning Procedures (Cont.)
Teach Master TV Setup to Target TV
1. Turn ON the Target TV.
The next step depends on whether the Express Script Installer Menu Wizard
appears on the screen:
• If the wizard is displayed, the TV is in the required factory default state. Use
the Up/Down arrow keys on the Installer Remote to select Exit, and then
press OK to exit the wizard. Then, go to step 3.
• Otherwise, ensure the Target TV is in Pass-through Mode, and then
continue with step 2.
Note: If the Master TV Setup contains a TV Zone # assignment, in
order for the proper location-specic TV Zone prole data to be
applied, you will need to assign the same Zone designation in the
Target TV(s) BEFORE Teaching is performed. Refer to Reference
section, “Using the TV Zoning Feature,” for further information.
2. Use the Installer Remote to access the Target TV Installer Menu (see
“Accessing the Installer Menu” on page 15 for further information). Set
Installer Menu item 117 FACT DEFAULT to 1, and press OK. When the
value changes back to 0, press OK again to exit the Installer Menu.
Note: This step restores factory default settings on the TV, which will in turn
re-activate the Express Script. Exit the wizard (see step 1); if applicable, set
the TV Zone # (see note above); and then continue with step 3.
3. Insert the USB memory device with the .tlx le into the Target TV USB IN port.
4. Press MENU on the Installer Remote to display the TV setup menus. Use
the arrow navigation keys to select/highlight the Option menu icon, and then
press the number “7” key a total of seven times to display the USB Download
Menu.
5. Use the Up/Down arrow keys to select Teach To TV (TLX), and then press
OK.
6. Use the Up/Down arrow keys to select the Master TV Setup you want to
install, and then press OK. Note: Filenames identify the TV and the TLX
version (see example at right).
Teaching status will be shown on a progress bar in a new window. When
the Teaching process is complete, the TV will briey display a “Teaching
Completed” window and then exit the USB Download Menu.
7. Remove the USB memory device from the Target TV, and verify that the
Master TV Setup is now resident on the Target TV.
Note: After the Teaching process is complete, the TV tunes according to the
setting of Installer Menu item 004 STRT CHANNEL (Start Channel). If a Start
Channel is specied, the TV will tune to that channel; otherwise, the TV will
return to the last channel tuned.
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Teach To TV (TLX)
42LQ640H-UA00003.TLX
UPDATING...
Do not unplug!
50%
Teach To TV
/ Previous
OK
CC
/ Previous
OK
CC