Filter
Top Products
ASSEMBLY
INSTRUCTIONS
FRAME ASSEMBLY
Step 1-2
FITNESS SYSTEMS
R
HOIST
24 - Foot Rest Assembly
25 - Foot Rest Leg Assembly
27 - Rubber spacer
56 - 1” dia. x 4 7/16 Shaft
56a - 1” dia. X 4 7/16 Shaft
73 - 1/2-13 x 1 Flat Head Bolt (wz)
124 - 1/2-13x6½HexBolts (bz)
125 - ½ Countersink Washer (wz)
126 - ½ Flat Washer (bz)
127 - ½ Lock Nut (bz)
Part/Hardware Descriptions
2403 Assembly
Page 4
Replacing the lower pivot shaft.
Start by having one person push the exercise arm assembly forward,
raising the top weight above the rest of the weight stack. Next place the
selector pin in the 6th hole of the weight stem to keep the top weight
elevated, taking tension off of the entire exercise arm assembly. Return
the exercise arm assembly to its rest position. With the one person
holding the foot rest assembly (24) stationary, have the second person
replace the lower pivot shaft (56) with (56a) in the foot rest leg assembly
(25) as shown in steps1&2. .Wrench tighten bolt