Filter
Top Products
ASSEMBLY
INSTRUCTIONS
INSTRUCTIONS
Page - 22403 Assembly
Standard Allen Wrench Set
(2.5mm, 3/32” - 5/16”)
Rubber Mallet
Tape Measure
Crescent Wrench
Belt Tensioning Wrench
(Hoist Tool SM374)
Step 1
TOOLS REQUIRED
Before beginning assembly please take the time to read the
instructions thoroughly. Please use the catalog in this manual to
make sure that all parts have been included in your shipment.
Use only Hoist replacement parts when servicing. Failure
to do so will void your warranty and could result in personal
injury.
Hoist equipment is designed to provide the smoothest, most
effective exercise motion possible. After assembly, you should
check all functions to ensure correct operation. If you
experience problems, first recheck the assembly instructions to
locate any possible errors made during assembly. If you are
unable to correct the problem, call your authorized Hoist dealer.
Be sure to have your serial number and this catalog when calling.
When all parts have been accounted for, continue on to Step 2.
When ordering use the part number and description from the
catalog.
FITNESS SYSTEMS
R
HOIST