Filter
Top Products
Part No. 52421 Genie Z-45/25 & Genie Z-45/25J 3
Operator's ManualFirst Edition · Seventh Printing
SAFETY RULES
Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area exposed to
the wind will decrease machine stability.
Use extreme care and slow speeds while driving
the machine in stowed position across uneven
terrain, debris, unstable or slippery surfaces and
near holes and drop-offs.
Do not drive the machine on or near uneven
terrain, unstable surfaces or other hazardous
conditions with the boom raised or extended.
Do not push off or pull toward any object outside
of the platform.
Maximum allowable 150 lbs
side force - ANSI & CSA 667 N
Maximum allowable 90 lbs
side force - CE 400 N
Do not alter or disable
machine components
that in any way affect
safety and stability.
Do not replace items
critical to machine
stability with items of
different weight or
specification.
Do not modify or alter an aerial work platform.
Mounting attachments for holding tools or other
materials onto the platform, toeboards or guard rail
system can increase the weight in the platform and
the surface area of the platform or the load.
Do not place or attach overhanging loads to any
part of this machine.
Do not place ladders or scaffolds in the platform or
against any part of this machine.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure all tires are in good condition, air-filled tires
are properly inflated and lug nuts are properly
tightened.
Z-45/25 & Z-45/25J Narrow Base Models: Do not
use air-filled tires. These machines are equipped
with foam-filled tires. Wheel weight and proper
counterweight configuration are critical to stability.