Filter
Top Products
32 Genie Z-45/25 & Genie Z-45/25J Part No. 52421
Operator's Manual First Edition · Seventh Printing
Specifications
Standard Base Models Z-45/25 Z-45/25J
(no jib) (jib)
Height, working maximum 51 ft 8 in 51 ft 6 in
15.74 m 15.69 m
Height, platform maximum 45 ft 8 in 45 ft 6 in
13.9 m 13.8 m
Height, stowed maximum 6 ft 10 in 6 ft 10 in
2.1 m 2.1 m
Horizontal reach maximum
1
24 ft 6 in 25 ft 3 in
1
7.5 m 7.7 m
Width 7 ft 4 in 7 ft 4 in
2.2 m 2.2 m
Length, stowed 18 ft 22 ft 3 in
5.5 m 6.8 m
Maximum load capacity 500 lb 500 lb
6 foot platform 227 kg 227 kg
Wheelbase 6 ft 8 in 6 ft 8 in
2.0 m 2.0 m
Turning radius (outside) 11 ft 6 in 11 ft 6 in
3.5 m 3.5 m
Turning radius (inside) 4 ft 6 in 4 ft 6 in
1.4 m 1.4 m
Turntable rotation (degrees) 359° 359°
Turntable tailswing 0 in 0 in
0 cm 0 cm
Power source Ford Gasoline/LPG LRG 425 EFI
(choice) OR Deutz Diesel F3L 1011
Drive speed, stowed 4.8 mph 4.8 mph
7.7 km/h 7.7 km/h
40 ft/5.7 sec 40 ft/5.7 sec
12.2 m/5.7 sec 12.2 m/5.7 sec
Drive speed, 0.6 mph 0.6 mph
booms raised 1 km/h 1 km/h
40 ft/45 sec 40 ft/45 sec
12.2 m/45 sec 12.2 m/45 sec
Airborne noise emissions 73 dB 73 dB
Maximum sound level at normal operating workstations
(A-weighted)
Ground clearance 13.25 in 13.25 in
center 33.6 cm 33.6 cm
Ground clearance 10 in 10 in
minimum 25.4 cm 25.4 cm
Standard Base Models Z-45/25 Z-45/25J
(no jib) (jib)
Controls 12V DC proportional
Weight See Serial Plate
(Machine weights vary with option configurations)
Platform dimensions, 6 foot 72 in x 30 in 72 in x 30 in
(length x width) 1.8 m x 76 cm 1.8 m x 76 cm
Platform leveling self-leveling self-leveling
Platform rotation 180 degrees 160 degrees
AC outlet in platform standard standard
Hydraulic pressure (maximum) 3200 psi 3200 psi
(boom functions) 221 bar 221 bar
Tire size, 4WD & 2WD RT 14-17.5 14 ply
Gradeability, stowed, 2WD 30% 30 %
Gradeability, stowed, 4WD 45% 45 %
Fuel tank capacity 17 gallons 17 gallons
64.3 liters 64.3 liters
1
Outreach specification with platform rotated
90 degrees
Continuous improvement of our products is a Genie policy. Product
specifications are subject to change without notice or obligation.