Filter
Top Products
22 Genie Z-45/25 & Genie Z-45/25J Part No. 52421
Operator's Manual First Edition · Seventh Printing
FUNCTION TESTS
Test Auxiliary Controls
62 Shut the engine off.
63 Pull out the red Emergency Stop button to
the on position.
64 Move the lift/drive select switch to the lift
position (if equipped).
65 Press down the foot switch.
66 Simultaneously hold
the auxiliary power
switch on and
activate each
function control
handle or toggle
switch.
Note: To conserve battery power, test each
function through a partial cycle.
Result: All boom and steer functions should
operate. Drive functions should not operate with
auxiliary power.
Test the Lift/Drive Select Function
(CE models)
Machines with lift/drive select switch:
67 Move the lift/drive select switch to the lift
position.
68 Press down the foot switch.
69 Move the drive control handle off center.
Result: No drive functions should operate.
70 Activate each boom function toggle switch.
Result: All boom functions should operate.
71 Move the lift/drive select switch to the drive
position.
72 Press down the foot switch.
73 Activate each boom function toggle switch.
Result: No boom functions should operate.
74 Move the drive control handle off center.
Result: The drive functions should operate.
75 Repair any malfunctions before operating the
machine.
Machines without lift/drive select switch:
76 Press down the foot switch.
77 Move the drive control handle off center and
activate a boom function toggle switch.
Result: No boom functions should operate. The
machine will move in the direction indicated on
the control panel.
78 Repair any malfunctions before operating the
machine.