Filter
Top Products
18 Genie Z-45/25 & Genie Z-45/25J Part No. 52421
Operator's Manual First Edition · Seventh Printing
FUNCTION TESTS
Test Machine Functions
25 Press down the foot switch.
26 Activate each machine function control handle
or toggle switch.
Result: All boom/platform functions should
operate through a full cycle.
Machines equipped with Platform Level Control
Disable Function: The platform level toggle switch
will not operate when the primary boom is raised
past the drive speed limit switch.
Test the Steering
27 Move the lift/drive select switch to the drive
position (if equipped).
28 Press down the foot switch.
29 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the blue triangle on the control panel OR slowly
move the control handle in the direction
indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
30 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the yellow triangle on the control panel OR
slowly move the control handle in the direction
indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.
At the Platform Controls
Test Emergency Stop
15 Turn the key switch to platform control and
restart the engine.
16 Push in the platform red Emergency Stop
button to the off position.
Result: The engine will shut off after 2 or 3
seconds.
17 Pull out the red Emergency Stop button and
restart the engine.
Test the Horn
18 Push the horn button.
Result: The horn should sound.
Test the Foot Switch
19 Push in the platform red Emergency Stop button
to the off position.
20 Pull out the red Emergency Stop button to
the on position but do not start the engine.
21 Press down the foot switch and attempt to start
the engine by moving the start toggle switch to
either side.
Result: The engine should not start.
22 Do not press down the foot switch and restart
the engine.
Result: The engine should start.
23 Move the lift/drive select switch to the lift
position (if equipped).
24 Do not press down the foot switch and test each
machine function.
Result: The machine functions should not
operate.