Filter
Top Products
Table 5 Feature Information for MPLS LDP Graceful Restart
Feature Name Releases Feature Information
MPLS LDP Graceful Restart 12.0(29)S 12.3(14)T
12.2(33)SRA
MPLS LDP Graceful Restart
assists a neighboring router that
has MPLS LDP Stateful
Switchover/Nonstop Forwarding
(SSO/NSF) Support and Graceful
Restart to recover gracefully from
an interruption in service.
In Cisco IOS Release 12.0(29)S,
this feature was introduced.
This feature was integrated into
Cisco IOS Release 12.3(14)T.
This feature was integrated into
Cisco IOS Release 12.2(33)SRA.
The following sections provide
information about this feature:
The following commands were
introduced or modified:
•
debug mpls ldp graceful-
restart
•
mpls ldp graceful-restart
•
mpls ldp graceful-restart
timers max-recovery
•
mpls ldp graceful-restart
timers neighbor-liveness
•
show mpls ip binding
•
show mpls ldp bindings
•
show mpls ldp graceful-
restart
•
show mpls ldp neighbor
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S.
and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective owners. The use of the word partner
does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be
actual addresses and phone numbers. Any examples, command display output, network topology diagrams,
and other figures included in the document are shown for illustrative purposes only. Any use of actual IP
addresses or phone numbers in illustrative content is unintentional and coincidental.
MPLS LDP Graceful Restart
MPLS LDP Configuration Guide, Cisco IOS Release 12.4
74