Filter
Top Products
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip cef [distributed]
4.
mpls ldp graceful-restart
5.
interface type slot/port
6.
mpls ip
7.
mpls label protocol {ldp| tdp| both}
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip cef [distributed]
Example:
Router(config)# ip cef distributed
Enables Cisco Express Forwarding (CEF).
Step 4
mpls ldp graceful-restart
Example:
Router(config)# mpls ldp graceful-restart
Enables the router to protect the LDP bindings and MPLS
forwarding state during a disruption in service.
Step 5
interface type slot/port
Example:
Router(config)# interface pos 3/0
Specifies an interface and enters interface configuration mode.
MPLS LDP Graceful Restart
How to Configure MPLS LDP Graceful Restart
MPLS LDP Configuration Guide, Cisco IOS Release 12.4
68