Filter
Top Products
EN-7
English
Power Outlet
Your Digital Keyboard runs on standard household
power. Be sure to turn off power whenever you are not
using the Digital Keyboard.
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Keyboard.
Use of a different type of AC adaptor can cause
malfunction of the Digital Keyboard.
Specified AC Adaptor: AD-E24250LW
• Use the supplied power cord to connect the AC
adaptor as shown in the illustration below.
Note the following important precautions to avoid
damage to the power cord.
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
During Movement
• Before moving the Digital Keyboard, be sure to
unplug the AC adaptor from the power outlet.
During Storage
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
• Never connect the AC adaptor (JEITA Standard,
with unified polarity plug) that comes with this Digital
Keyboard to any other device besides this Digital
Keyboard. Doing so creates the risk of malfunction.
• Make sure the Digital Keyboard is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
• Use the AC adaptor so its label surface is pointed
downwards. The AC adaptor becomes prone to
emitting electromagnetic waves when the label
surface is facing upwards.
1.
Press the 1 P button to turn on power.
• Do not touch the keyboard, pedals, or buttons while
the startup screen is on the display. Doing so will
cause malfunction.
• Use the Digital Keyboard’s VOLUME controller (2)
to adjust the volume.
2.
To turn off the Digital Keyboard, hold down
the 1 P button until the Digital Keyboard’s
display goes blank.
• The message shown below may appear while data is
being saved to Digital Keyboard memory or
immediately after you turn on the Digital Keyboard.
Never turn off the Digital Keyboard while this
message is displayed.
• Pressing the 1 P button to turn off power actually
puts the Digital Keyboard into a standby state.
Minute amounts of current continue to flow within
the Digital Keyboard in the standby state. If you do
not plan to use the Digital Keyboard for a long time
or if there is a lightning storm in your area, be sure
to unplug the AC adaptor from the power outlet.
Using an AC Adaptor
Household power outlet
Power cord
DC 24V terminal AC adaptor
• Configuration and type depends on
your geographic location.
Turning Power On or Off
MZX300_X500-ES-1A.indd 9 2015/10/07 15:46:40