Filter
Top Products
92
BOther operation
Setting the alarm (Melody
Timer)
See the illustrations in the Japanese text
(pages 54 and 55).
You can set the alarm to go off in 1 to 99
minutes.
On the recorder
1 While the recorder is stopped, playing,
or play-paused, press the jog lever (L).
2 Flip the jog lever (L) until “M-TIMER”
flashes in the display, and press the
lever.
3 Flip the jog lever (L) until “ON”
flashes in the display, and then press
the lever.
, lights up in the display.
4 Flip the jog lever (L) repeatedly to
select the elapsed time.
One rotation of the control changes the
elapsed time setting (TIME :) by 1
minute, within a range of 1 to 99
minutes. To change the time quickly,
flip and hold the jog lever (L).
5 Press the jog lever (L).
The time is set.
6 Flip the jog lever (L) repeatedly to
select the alarm sound.
The following sounds can be selected:
“MELODY : 1” Melody (Orpheus in
the Underworld)
“MELODY : 2” Melody (The Four
Seasons)
“MELODY : 3” Beeps
7 Press the jog lever (L).
Melody timer is set.
The time remaining until the alarm is
shown in the display while the
recorder is stopped or play-paused.
To show the remaining time during
play, do steps 1 to 3.
On the remote control
1 While the recorder is stopped, playing,
or play-paused, press DISPLAY on the
remote control for 2 seconds or more,
and then press x.
2 Turn the control towards . or
towards N> until “M-TIMER”
flashes in the display, and then press
x.
3 Turn the control towards . or
towards N> until “ON” flashes in
the display, and then press x.
, lights up in the display.
4 Turn the control towards . or
towards N> to select the elapsed
time.
One rotation of the control changes the
elapsed time setting (TIME :) by 1
minute, within a range of 1 to 99
minutes. To change the time quickly,
turn and hold the control towards .
or towards N>.
5 Press x.
The time is set.
6 Turn the control towards . or
towards N> to select the alarm
sound.
The following sounds can be selected:
“MELODY : 1” Melody (Orpheus in
the Underworld)
“MELODY : 2” Melody (The Four
Seasons)
“MELODY : 3” Beeps
7 Press x.
The alarm is set.
The time remaining until the alarm is
shown in the display while the
recorder is stopped or play-paused.
To show the remaining time during
play, do steps 1 to 3.
To cancel setting the alarm.
Press x on the recorder, or press DISPLAY
for 2 seconds or more on the remote
control.
To cancel Melody Timer.
Select “OFF” in step 2, and then press the
jog lever (L) on the recorder or x on the
remote control.
To stop the alarm.
Press any button.
Notes
•The settings will be lost when you start
recording.
•The timer will begin counting down (using
the factory setting) from the moment you
select “ON” in step 3. The recorder will
begin counting down again from the
moment you change the elapsed time in step
4.