Filter
Top Products
86
Erasing a whole disc
See the illustration in the Japanese text
(page 44).
You can quickly erase all the tracks and
data of the MD at the same time. Note that
once a recording has been erased, you
cannot retrieve it. Be sure to check the
contents of the disc you want to erase.
1 While the recorder is stopped, press
the jog lever (L), flip the lever until
“EDIT” flashes in the display, and then
press the lever again.
“ : Name” flashes in the display.
2 Flip the jog lever (L) until “ :
Erase” flashes in the display, and then
press the lever.
“AllErase?” and “PushENTER” appear
alternately in the display.
To cancel erasing, press x.
3 Press the jog lever (L) again.
“TOC Edit” flashes in the display, and
all the tracks will be erased.
When erasing is complete,
“BLANKDISC” appears in the display.
Adding a track mark
See the illustration in the Japanese text
(page 44).
You can insert a track mark into a track.
1 While playing or pausing an MD, press
T MARK on the recorder at the point
you want to mark.
“MARK ON” appears in the display,
and the track mark is added.
To add track marks while
recording (except while synchro-
recording)
Press T MARK at the point you want to add a
track mark. You can use Auto Time Stamp to
add track marks automatically at specified
intervals.
BEditing recorded tracks
You can edit your recordings by adding/
erasing track marks or labeling tracks and
discs.
Premastered MDs cannot be edited.
Notes on editing
• Do not move or jog the recorder while “TOC
Edit”* is flashing in the display.
• You cannot edit tracks on an MD that is
record -protected. Before editing tracks,
close the tab on the side of the MD.
• If you perform an editing operation while
playing, be sure not to turn the power off
until “TOC Edit” disappears in the display.
• The lid does not open until “TOC Edit”
disappears in the display after editing.
* TOC = Table of Contents
Erasing a track
See the illustration in the Japanese text
(page 43).
You can quickly erase a recorded track.
Note that once a recording has been erased,
you cannot retrieve it. Make sure of the
track you are erasing.
1 While playing the track you want to
erase, press the jog lever (L), flip the
lever repeatedly until “EDIT” flashes
in the display, and then press the lever
again.
“ : Name” flashes in the display,
and the recorder plays the selected
track repeatedly.
2 Flip the jog lever (L) until “ : Erase”
flashes in the display, and then press
the lever.
“Erase OK?” and “PushENTER”
appear alternately in the display.
To cancel erasing, press x.
3 Press the jog lever (L) again.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part.