Filter
Top Products
90
Storing phrases frequently
used in labeling (Phrase Bank)
See the illustration in the Japanese text
(pages 50 and 51)
Phrases that you often use in track or disc
labeling can be stored in the recorder’s
memory. Approximately 40 phrases of
about 10 characters each (with a total
character count of about 600) can be stored
in the phrase bank. The actual number will
depend on the length of each phrases.
On the recorder
Storing phrases while labeling a track or
disc
1 Do the procedure “Labeling on the
recorder” in “Labeling recordings”
(page 88) to enter a phrase.
2 After entering the phrase, press X for 2
seconds or more.
“Entry!” appears in the display and the
cursor flashes after the phrase you just
stored. You can then continue with
labeling operation.
Storing phrases using the EDIT menu
1 Press the jog lever (L), flip the lever
until “EDIT” flashes in the display,
and then press the lever again.
2 Flip the jog lever (L) until “Name
Bank” flashes in the display, and then
press the lever.
3 Enter the phrase you want to store,
and then press the jog lever (L) for 2
seconds or more.
“Entry!” appears in the display and the
phrase is stored.
Retrieving phrases stored in the phrase
bank
You can retrieve a phrase stored in the
phrase bank anytime you want to use it in
a track or disc name.
Searching for a phrase by displaying the
stored phrase one by one
1 Do the procedure “Labeling on the
recorder” in “Labeling recordings”
(page 88) until “ :Name” or
“ :Name” flashes in the display.
Then press the jog lever (L).
2 Press X repeatedly until the first
phrase stored in the phrase bank
appears in the display.
3 Flip the jog lever (L) repeatedly.
Flipping the jog lever (L) causes the
phrases stored in the phrase bank to
appear one by one in sequential order.
If you press X at this time, the first
phrase stored in the phrase bank
retrieved.
4 Press the jog lever (L) while the phrase
you want is shown in the display.
The cursor flashes after the phrase you
just retrieved. You can then continue
with labeling operation.
Searching for a phrase by its first letter
1 When labeling a track or disc, use VOL
+/– to move the cursor to the letter
which the desired phrase begins with.
2 Press X to search.
The phrase for that letter appears in
the display. If there are two or more
phrases that start with that letter, press
X to see the next phrase.
3 Press the jog lever (L) while the phrase
you want is shown in the display.
The cursor flashes after the phrase you
just retrieved. You can then continue
with labeling operation.
Erasing phrases
You can erase phrases from the phrase
bank while the recorder is stopped. You
can also erase phrases when the recorder is
empty.
1 Press the jog lever (L), flip the lever
until “EDIT” appears, and then press
the lever again.
2 Flip the jog lever (L) until “BankErase”
appears, and then press the lever.
3 Flip the jog lever (L) until the phrase
you want to erase appears, and then
press the lever.
“Erase!” appears and the phrase is
erased. If no phrase is stored in the
phrase bank, “EMPTY” appears in the
display.
To cancel the operation, press x.