Filter
Top Products
87
Operating Instructions
Moving recorded tracks
See the illustrations in the Japanese text
(page 46).
You can change the order of the recorded
tracks.
On the recorder
1 While playing the track you want to
move, press the jog lever (L), flip the
lever until “EDIT” flashes in the
display, and then press the lever again.
“ : Name” flashes in the display
and the recorder plays the selected
track repeatedly.
2 Flip the jog lever (L) until “ : Move”
flashes in the display, and then press
the lever.
3 Flip the jog lever (L) to select the
destination track number.
To cancel moving, press x.
4 Press the jog lever (L) again.
The track moves to the selected
destination track.
On the remote control
1 Press DISPLAY for 2 seconds or more,
turn the control towards . or
towards N> until “EDIT” flashes
in the display, and then press x.
“ : Name” flashes in the display
and the recorder plays the selected
track repeatedly.
2 Turn the control towards . or
towards N> until “ : Move”
appears in the display, and then press
x.
3 Turn the control towards . or
towards N> to select the
destination track number.
4 Press x.
The selected track moves just before
the destination track.
Erasing a track mark
See the illustrations in the Japanese text
(page 45).
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can erase
a track mark to combine the tracks before
and after the track mark.
1 While playing the track with the track
mark you want to erase, press X to
pause.
2 Find the track mark by flipping the jog
lever (R) towards . slightly.
“00:00” flashes in the display.
3 Press T MARK to erase the mark.
“MARK OFF” appears in the display.
The track mark is erased and the two
tracks are combined. The number of
the newly combined track will be that
of the first track and the succeeding
tracks will be renumbered.
Notes
•You cannnot erase a track mark that has
been written between track marks recorded
in different recording mode (such as a track
mark between a track recorded in LP2 and a
track recorded in LP4). If you try to erase
such a track mark, “SORRY” appears in the
display.
• You cannot erase a track mark that has been
written between a track recorded through a
digital connection and a track recorded
through an analog connection. If you try to
erase such a track mark, “SORRY” appears
in the display.