Filter
Top Products
88
5 Repeat step 4 and enter all characters
of the label name.
6 Press down the jog lever (L) for 2
seconds or more.
The track or disc is labeled.
Labeling a track during playback
1 Insert a disc and play the track you
want to label.
2 Press the jog lever (L), flip the lever
until “EDIT” flashes in the display,
and then press the lever again.
“ : Name” flashes in the display.
3 Press the jog lever (L) again.
4 Follow steps 4 to 6 of “Labeling a disc
during stop” above.
Labeling a track or a disc during
recording
1 While recording, press the jog lever
(L), flip the lever until “EDIT” flashes
in the display, and then press the lever
again.
“ : Name” flashes in the display.
2 To label a track, press the jog lever (L)
again.
To label a disc, flip the lever (L) until
“ : Name” flashes in the display,
and then press the lever.
3 Follow steps 4 to 6 of “Labeling a disc
during stop” above.
To cancel labeling, press x.
Labeling on the remote control
Labeling a disc during stop
1 Insert a disc.
To label a disc that is already in the
recorder, press x to stop.
2 Press DISPLAY for 2 seconds or more,
turn the control towards . or
towards N> until “EDIT” flashes
in the display, and then press x.
“ : Name” flashes in the display.
3 Press x.
The disc is ready to be labeled.
Labeling recordings
See the illustration in the Japanese text
(pages 47 and 48).
You can name tracks during playback,
discs during stop, and both during
recording. Each name can be as long as 200
letters.
Each disc can hold up to 1700
alphanumeric letters or 800 katakana
characters during playback or stop.
Available characters
•Capital and small letters of the English
alphabet.
•Numbers 0 to 9
•! " # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _(space)
Labeling on the recorder
Labeling a disc during stop
1 Insert a disc.
2 Press the jog lever (L), flip the lever
until “EDIT” flashes in the display,
and then press the lever again.
“ : Name” flashes in the display.
3 Press the jog lever (L) again.
4 Flip the jog lever (L) to select a letter
and press the lever to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press X to switch between katakana,
the alphabet, symbols/numbers, and
phrases (if phrases are stored in the
phrase bank).
Press VOL +/– to move the cursor to
left or right.
Flip the jog lever (R) towards >
when inputting alphabet, symbol or
numbers to change the letter to the one
before/next one. Flip the jog lever (R)
towards . to go back.
Press END SEARCH together with
VOL + to insert a blank space to type
in a new letter.
Press END SEARCH together with
VOL – to delete a letter and move back
all following letters to the left.
Press x to cancel labeling.