Sony MZ-R900 Inflatable Bouncy Toy User Manual


 
82
Copying CD text information
while recording (Joint Text)
CD text connecting cable, CD that support
CD-TEXT, and CD player that support
Joint Text required.
See the illustration in the Japanese text
(pages 33 and 34)
By connecting the recorder to a Sony
portable CD player that supports Joint Text
(the CD text copying function) (D-E990,
etc.), you can copy track and disc names
automatically during recording. In
addition to the CD text connecting cable
(RK-TXT1), make sure to connect the
recorder to the portable CD player with an
optical cable.
1 Press and slide REC to the right to start
recording on the recorder, and start
playing the CD in the portable CD
player.
“SYNC”, “REC” and “ ” lights up in
the display.
“CD TEXT” appears for a few seconds,
then “001 TEXT?” and “PushENTER”
alternate in the display.
“NO TEXT” appears at this time if no
track name information exists in the
CD. In this case, the track name will
not be copied.
2 Press the jog lever (L).
Track name scrolls, and then the track
name and “PushENTER” alternate in
the display.
3 Press the jog lever (L).
Track name scrolls in the display while
the name is copied.
4 Follow steps 2 and 3 to copy each new
track name that appears.
5 Press x on the recorder at the point
you want to stop recording.
” lights up, and then “000 TEXT”
and “PushENTER” alternate in the
display.
If you don’t want to copy the disc
name information, press x again. The
disc name is not copied and the
operation ends.
“NO TEXT” appears at this time if no
disc name information exists in the
CD. In this case, the operation ends
without copying the disc name.
6 Press the jog lever (L).
Disc name scrolls, and then disc name
and “PushENTER” alternate in the
display.
7 Press the jog lever (L).
“TOC Edit” flashes.
Afterwards, the disc name scrolls in
the display.
Notes
•If you copy disc name information to a disc
with a previously recorded disc name, the
old disc name will be overwritten with the
new one.
•When the CD text copying function is on,
various settings and editing functions
cannot be accessed with the jog lever.
•The CD text copying function (joint text) can
only be used with component (D-E990,
D-E880, D-E770, D-F700, D-E01) with the
joint text logo.
•The CD text copying function can only be
used with CDs and component (D-E990,
etc.) that support CD-TEXT.
•The RK-TXT1 CD text connecting cable is
designed for exclusive use with this recorder
and Sony portable CD player (D-E990, etc.).
Do not use a connecting cable of another
make to copy CD text information.
•The remote becomes inoperative when the
CD text connecting cable (RK-TXT1) is
connected to the recorder.
•Stopping or pausing playback on the CD
player automatically causes recording on the
recorder to pause. A new track mark is
automatically added when you resume
recording.
•The track name of the track currently played
will not be recorded if you stop or pause CD
playback in the middle of the copying
process on the recorder.