Filter
Top Products
C. Basic Use
Check Buckle
Position
Determine which of the
available buckle positions
will be comfortable and
provide a snug fit for your
child.
6.
13
14
Rotate metal retainer,
then insert retainer up
through the plastic shell
and pad.
From the top, pull buckle
free from plastic shell
and pad.
Reposition buckle
location. Insert the
buckle’s metal retainer
through the desired
slot. Make sure buckle
is facing forward.
Pull buckle’s metal
retainer completely
through pad and
plastic shell.
Pull up on buckle to
make sure it is secured.
The buckle must not
pull out.
Failure to place buckle’s metal retainer
completely through pad and plastic shell can
result in serious injury or death.
b.
c.
d.
e.
f.
continued on next page.
To Change Buckle
Position
Remove your child. Flip
the child restraint over
and locate buckle’s metal
retainer.
a.
You MUST use the 1st or 2nd buckle strap slots when
rear-facing. Any slot can be used for forward-facing.
1
2
3
Place Child in Child
Restraint
Place the child’s bottom and
back flat against the child
restraint. This will increase
comfort and allow the
harness straps to be properly
tightened.
5.