Filter
Top Products
27 28
D. General Vehicle Installation
Your vehicle’s features may be considerably different than
those pictured here. Consult your vehicle owner’s manual to
help identify your vehicle’s specific features and locations.
D-1 Understanding Your Vehicle
Anchor Brackets
For Top Anchorage
Strap (Tether)
(Forward-Facing Only)
LATCH Anchors
Located in the seat
bight.
Air Bags
Consult your vehicle
owner’s manual for
all air bag locations.
Seat Bight
Vehicle Seat Belts
Consult your vehicle
owner’s manual for
vehicle belt use.
Safety Tip:
To help protect your vehicle seat’s upholstery from
damage, use a single layered towel underneath and
behind child restraint.
To avoid your child being seriously burned,
take the following precautions:
1. Park in the shade or where sun does not directly
hit the child restraint.
2. Cover the child restraint with a sheet or blanket
when not in use.
3. Check for hot child restraint and buckles before
placing child in child restraint.
4.
Thread harness straps through
each buckle tongue (3).
Thread the chest clip (4). Do
the same to the other harness
end. Do Not twist harness.
Push harness ends through
slots in headrest
(5).
Attach Harness Straps to
Splitter Plate
Fit loops on harness ends
completely on the splitter
plate.
NOTE: Make sure sewn end
of the harness strap loop
faces towards you.
6.
PUSH
3
4
5
Pull Harness Through
Pad and Shell
Make sure the metal bar is
above the harness straps.
5.
Harness MUST be threaded under the metal bar.
Harness system must be reattached correctly.
Failure to follow these warnings can result in
serious injury or death.