Filter
Top Products
49
50
F. Installing Forward-Facing
Installation Tip:
Loosely attach
the tether hook
before attaching
the LATCH belt.
Consult vehicle’s
owner manual for
specific location.
Hook LATCH to
Vehicle Anchor
Fasten one LATCH belt hook
to the anchor in the vehicle
seat bight. Repeat for other
side of child restraint.
Tighten LATCH Belt
Place knee in the child
restraint. Push down firmly
while pulling up on the loop
to tighten belt.
It maybe easier to tighten
the belt through the belt path
opening as shown.
4.
3.
Tighten Top Anchorage
Strap (Tether)
Push firmly on the back
of the child restraint and
tighten top anchorage
strap (tether).
5.
Check LATCH Belt
Tightness
Grasp the child
restraint at the belt
path with one hand. Push
and pull the child restraint
from side to side, forward
and back. The child
restraint should not move
more than 1 inch.
NOTE: If it moves more
than an 1 inch, try
reinstalling the child restraint or try another seating location.
Secure your child in the child restraint.
1
2
To Remove LATCH Belt
From Vehicle Anchor
Remove child from child
restraint. Press down firmly
on adjuster side of child
restraint and press release
button to release tension.
Unhook LATCH from bar by
squeezing spring lever and
twist hook (1). Pull LATCH
hook away (2).
7.
6.