Filter
Top Products
47
48
F. Installing Forward-Facing
F-3 Preparing to Install
LATCH Forward-Facing
Routing LATCH Belt
Insert the hook without the
adjuster closest to
it, through the
forward-facing belt path.
1.
Thread LATCH Across
Pull the LATCH hook across
the back and out the other
side as shown. Do not
twist the LATCH belt.
2.
Note: Pull the LATCH belt out of the rear-facing belt path
if you have used this child restraint rear-facing.
2.
Place Child Restraint in
the Back Seat
Forward-Facing
Place child restraint flush
against the vehicle seat back
forward-facing.
Child Restraint Must be
Upright
R
otate recline stand out
and push upward to lock in
position.
F-4 Install Forward-Facing
With LATCH
Note: Review your vehicle’s owner manual for LATCH belt use.
1.
Do not use the LATCH system along with the
vehicle belt.
Check LATCH belt before each use. Use only
if the belt can be tightened properly and
securely.
Failure to follow these warnings can result in
serious injury or death.
continued on next page.