Filter
Top Products
Check LATCH Belt
Tightness
Grasp the child restraint
at the belt path with one
hand. Push and pull the child
restraint from side to side,
forward and back. The child
restraint should not move
more than 1 inch.
NOTE: If it moves more than an inch, try reinstalling the child
restraint or try another seating location.
Secure your child in the child restraint. Recheck the recline
angle to make sure it is reclined according to your child’s weight.
Repeat steps if not reclined correctly.
42
41
E. Installing Rear-Facing
7.
1
2
To Remove LATCH Belt
From Vehicle Anchor
Remove child from child
restraint. Press down firmly
on adjuster side of child
restraint and press release
button to release tension.
Unhook LATCH from bar by
squeezing spring lever and
twist hook (1). Pull LATCH
hook away (2).
6.
E-4 Install Rear-Facing with
Vehicle Belts
Store Top Anchorage
Hook (Tether)
Attach the top anchorage
hook (tether) to recline stand
as shown. Tighten tether to
remove the slack.
2.
Secure LATCH Belts
You MUST fasten the LATCH
belt hooks to the side of
plastic shells as shown when
using the vehicle seat belts.
1.
Most Upright Level to Gr
ound Line
Most Recl
ined Level to Gro
und Lin
e
Rear-Facing
For Children 5-22 lbs
(2.3-10 kg)
B
o
ttom
Line MUST Be
Level
with
the
Gro
u
nd.
Rear-Facing
For Children 22-40
lbs (
1
0
.1-18 kg)
AND can sit up unassisted
Recline r
a
nge is between the 2 leve
l to
ground lin
es.
Re
v
i
ew instruction manual.
4360-2334
Place Child Restraint
in the Back Seat Rear-
Facing
Move the front seats forward
to give you room to install the
child restraint. With the child
restraint in the fully reclined
position, center the child
restraint in the chosen seating
position.
3.
Do not use the LATCH system along with the
vehicle lap or lap/shoulder belt. Secure LATCH
belts when using the vehicle belts.
Check the vehicle belt before each use. Use only
if the belt is tightened properly and securely.
Attach the top anchorage hook (tether) to recline
stand when used rear-facing.
Failure to follow these warnings can result in
serious injury or death.
continued on next page.
Tighten LATCH Belt
Push down firmly on the child
restraint and pull up on the
free end of LATCH belt to
tighten.
It maybe easier to tighten the
LATCH belt through the belt
path opening as shown.
6.