Filter
Top Products
22
21
C. Basic Use
C-5 Accessories
Install Cup Holder
(on select models)
Pull pad off corner. Hook
bottom of cup holder to edge
of plastic shell.
Rotate cup holder up until it
snaps into the hole on the
plastic shell. Replace pad.
Cup holder can be on either
side.
C-6 Reclining Child Restraint
Rear-facing - 1 Must be
fully reclined.
Forward-Facing -
2 Must
be upright.
1
2
Upright
R
otate recline stand out
and push upward to lock in
position.
To Recline
Pull recline stand down and
rotate under child restraint.
Remove Harness Straps
from Splitter Plate
Fully loosen harness
straps. Locate splitter
plate on the back of
the child restraint and
unfasten the harness
straps.
1.
PUSH
Remove Harness
Straps
Pull harness through the
slots from the front
(1).
Unthread harness from
the chest clip
(2).
Unthread harness from
the buckle tongues
(3).
Pull harness out of plastic
shell
(4).
2.
C-7 Removing Harness System
1
2
3
4
Remove Buckle
Flip the child restraint over
and locate buckle’s metal
retainer.
3.