Filter
Top Products
En
8
b EQ (HI, LOW) controls (page 11 )
These adjust the tone quality of the [MIC1] and [MIC2] channels.
c MIC LEVEL control (page 11 )
Adjusts the level of the sound output from the [MIC1] channel or
[MIC2] channel.
d MIDI ON/OFF buttons (page 14 )
Switches the MIDI function on and off.
e USB connection indicator (page 10 )
— USB terminal: lights when connected to a computer. Blinks
when the driver software is not installed on your computer.
— Mobile device connection terminal (USB terminal): Lights when
connected to a compatible mobile device. Blinks when con-
nected to a non-compatible device.
f USB terminal (page 10 )
Connect the computer.
g Input selector switches (page 11 )
Selects the input source of each channel from the components con-
nected to this unit.
h CLIP indicators (page 11 )
! All channels: Lights when audio is input to the channel at exces-
sive levels.
! Master: Lights when excessive levels of audio are output from the
[MASTER1] or [MASTER2] terminals.
i TRIM control (page 11 )
Adjusts the level of audio signals input in each channel.
j EQ/ISO (HI, MID, LOW) controls (page 11 )
These adjust the sound quality of the respective channels.
k Channel Level Indicator (page 11 )
Displays the sound level of the respective channels before passing
through the channel faders.
l COLOR control (page 13 )
This changes the parameters of the SOUND COLOR FX of the differ-
ent channels.
m Channel Fader (page 11 )
Adjusts the level of audio signals output in each channel.
n CROSS FADER ASSIGN (A, THRU, B) selector switch
(page 11 )
Sets the output destination of each channel to [A] or [B].
o Crossfader (page 11 )
Outputs audio signals assigned by the crossfader assign switch cor-
responding to the curve characteristics selected by [CROSS FADER]
(Crossfader Curve Selector Switch).
p MASTER LEVEL control (page 11 )
Audio signals are output from the [MASTER1] and [MASTER2]
terminals.
q Master Level Indicator (page 11 )
Displays the audio level output from the [MASTER1], [MASTER2],
and [DIGITAL MASTER OUT] terminals.
r BALANCE control (page 12 )
Adjusts the left/right balance of the sound output from the
[MASTER1] terminals, etc.
s BOOTH MONITOR control (page 12 )
Adjusts the level of audio signals output from the [BOOTH] terminal.
t EQ CURVE (ISOLATOR, EQ) selector switch (page 11 )
Switches the function of the [EQ/ISO (HI, MID, LOW)] controls.
u CH FADER ( , , ) selector switch
(page 11 )
Switches the channel fader’s curve characteristics.
v CROSS FADER ( , , ) selector switch
(page 11 )
This switches the crossfader curve characteristics.
w SEND/RETURN (1/4” JACK, ) selector switch
(page 14 )
Switches the I/O source of the SEND/RETURN channel.
This selects either the device connected to the [SEND/RETURN] ter-
minals on the back of the unit or the device connected to the mobile
device connection terminal on the operation panel.
x RETURN TYPE (AUX, INSERT) selector switch
(page 14 )
Selects the SEND/RETURN method.
y Mobile device connection terminal (USB port)
(page 10 )
Connect a mobile device.
z SEND/RETURN ON/OFF button (page 14 )
Turns SEND/RETURN on and off.
A SEND/RETURN LEVEL control (page 14 )
Adjusts the sound level of SEND/RETURN.
B Main unit display (page 13 )
Displays the effect name, BPM, effect parameter, etc.
C X-PAD (page 14 )
BEAT FX is on while this is touched. Also, the parameter can be
adjusted depending on the place touched.
D BEAT c, d buttons (page 13 )
Set the beat fraction for synchronizing the effect sound.
E TAP button (page 13 )
When the BPM measurement mode is set to [TAP], tap the button
with a finger to input the BPM manually.
F QUANTIZE (UTILITY, WAKE UP) button (page 12 )
— QUANTIZE: When the QUANTIZE function is turned on for BEAT
FX, the effect is applied to the sound without getting out of tempo
with the currently playing track.
— UTILITY: Displays the [UTILITY] screen.
— WAKE UP: Cancels the standby state.
G AUTO/TAP button (page 13 )
Switches the BPM measurement mode.
H FX FREQUENCY button (page 13 )
Select the range to apply BEAT FX. BEAT FX is applied to the range of
the button that is lit.
I Beat effect selector switch (page 13 )
Switches the BEAT FX effect type.
J Effect channel selector switch (page 13 )
Switches the channel to which the BEAT FX and SEND/RETURN are
to be applied.
K TIME control (page 13 )
Adjusts the BEAT FX’s time parameter.
L LEVEL/DEPTH control (page 13 )
Adjusts the BEAT FX’s quantitative parameter.
M Beat effect ON/OFF button (page 13 )
Turns BEAT FX on and off.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.